شنبه ۱۶ دی ۱۳۹۶ -

رزومه علمی - پژوهشی دکتر اباذر اصغری

Abazar Asghari, PhD Associate Professor of Structural Engineering Urmia University of Technology Faculty of Civil Engineering Urmia, Iran PO. Box 57155/419 Phone: + 98-44 33554180 (office) Email: A.Asghari uut.ac.ir   Educations: Ph.D. in Structural Engineering, Tehran University, Faculty of Technology, Iran, 1995-2002. Ph.D. Thesis: Determination of ultimate load and possible failure lines for continuous media using adaptive finite element method. MSc., in Structural Engineering, Tehran University, Faculty of Technology, Iran, 1991-1994. MS.c. Thesis: Study of moment resistant knee braced frames as an alternative for moment resisting  frames with rigid connections. BSc., Esfahan University of Technology, Faculty of Civil Engineering, Iran, 1987-1990.   Position: ● Associate Professor of Structural Engineering, Faculty of Civil Engineering, Urmia University of Technology. ● Member of Technical Committee of Chapter 10 (Design and Construction of Steel Buildings), Iranian National Building Code, Ministry of Roads and Urban Development, Iran, 2008-present. ● Member of the Editorial Council, Iranian National Building Code, Ministry of Roads and Urban Development, Iran, 2010-2013. ● Member of Technical Committee of Chapter 1 (Definitions), Iranian National Building Code, Ministry of Roads and Urban Development, Iran, 2010-2013. ● Member of Technical Committee of Chapter 22 (Maintenance of buildings), Iranian National Building Code, Ministry of Roads and Urban Development, Iran, 2010-2013. ● Primary Text Supplier of third Edition of Chapter 10 with subject of load and resistance factor design (Design and Construction of Steel Buildings), Iranian National Building Code, Ministry of Roads and Urban Development, Iran, 2008-present. ● Initial Draft producer of third Edition of Chapter 10 with subject of load and resistance factor design (Design and Construction of Steel Buildings), Iranian National Building Code, Ministry of Roads and Urban Development, Iran, 2007-2009. ● Initial Draft producer of fourth Edition of Chapter 10 (Design and Construction of Steel Buildings), Iranian National Building Code, Ministry of Roads and Urban Development, Iran, 2010-2013. ● Main Member of the Civil Engineering Committee, Ministry of Roads and Urban Development, Iran, 2010- present. ● Head of Sub-Committee (ISIRI/TC98/SC2), Loads, Pressure and other Functions, National Iranian Standards organization, Iran, 2015- present. ● Member of Director’s Board of the Iranian Society of Steel and Structures, 2014-present. ● Member of the Iranian Society of Steel and Structures, 2008-present. ● Responsible for the technical supervision of the Urmia University of Technology Development, 2010-present. ● Member of Editorial Board of the International Journal of Earthquake Engineering and Hazard Mitigation, 2013-present. Research Interests: ●  Design and Construction of Steel Buildings ●  Seismic Design of Steel and Concrete Buildings ●  Tall Buildings (Analysis and Design) ●  Composite Structures ●  Dynamics of Structures (Basis and Application to Earthquake Engineering) ●  Stability of Steel Structures ●  Evaluation and Design based on Performance of Steel Buildings ●  Rehabilitation and Seismic Retrofitting ●  Nonlinear Finite Element Analysis of Steel Structures   Teaching Subjects: ●  Advanced Steel structures (Graduate Course) ●  Seismic Design of Steel structures (Graduate Course) ●  Stability of Structures (Graduate Course) ●  Dynamics of Structures (Graduate Course) ●  Earthquake Engineering (Graduate Course) ●  Finite Elements (Graduate Course) ●  Seismic Reconstruction of Existing structures (Graduate Course) ●  Vulnerability and Reconstruction of Existing structures (Graduate Course) ●  Steel structures-1 (Undergraduate Course) ●  Steel structures-2 (Undergraduate Course) ●  Principles of Earthquake and Wind Engineering (Undergraduate Course)   Books: ●  Dynamics of Structures, Volume 1, Five times Republished. ●  Dynamics of Structures, Volume 2, Five times Republished. ●  Stahlbau profile (in Accordance with Iranian national Building Code, Part 10, Steel Structures Design), three time Republished. ●  Design Guide for Columns Filled with Concrete (CFT), two time Republished. ●  Steel Structures Design–Volume 1(The Year’s Book of the Islamic republic of Iran, 2018). ●  Steel Structures Design–Volume 2 (The Year’s Book of the Islamic republic of Iran, 2018). ●  Steel Structures Design–Volume 3 (The Year’s Book of the Islamic republic of Iran, 2018). ●  Steel Structures Design–Volume 4 (The Year’s Book of the Islamic republic of Iran, 2018).   Papers in National and International Journals: ●  Abazar Asghari, Saeid Saharkhizan,”Seismic Design and Performance Evaluation of Steel Frames with Knee-Element Connections”, Journal of Constructional Steel Research 154 (2019) 161–176. ●  Mohammad Jalilzadeh Afshari, Abazar Asghari and Majid Gholhaki,”Shear strength and stiffness enhancement of cross‑stiffened steel plate shear walls”, International Journal of Advanced Structural Engineering (2019) 11:179–193. ●  A.Asghari, R.Mirghaderi,”Determination of ultimate load and possible failure path for solid continuous media using adaptive refinement process”, Scientia Iranica A (2012) 19 (4), 1033–1043. ●  A.Asghari, R.Mirghaderi and A.H.Gandomi, ”Determination of ultimate load and possible failure path for a rigid strip footing on soil partially supported by retaining wall using an adaptive refinement process”, Int. J. Mathematical Modeling and Numerical Optimization, Vol. 3, No. 3, 2012. ●  Asghari, A, Azimi B, Gandomi AH. 2013. Perforation effect on the hysteretic response of coupled shear walls. International Journal of Earthquake Engineering and Hazard Mitigation 1: 72–7. ●  Pejman Aminian, Mohamad Reza Javid, Abazar Asghari, Amir Hossein Gandomi and Milad Arab Esmaeili,“A robust predictive model for base shear of steel frame structures using a hybrid genetic programming and simulated annealing method”, Neural Computing and Applications, 2011. ●  Amir Hossein Gandomi, Amir Hossein Alavi, Abazar Asghari, Hadi Niroomand, Ali Matin Nazar, “An innovative approach for modeling of hysteretic energy demand in steel moment resisting frames”,  Neural Computing and Applications, 2013. ●  A.Asghari and A.H.Gandomi, ” Ductility Reduction Factor and Collapse Mechanism Evaluation of A New Steel Knee Braced Frame”, Structure and Infrastructure Engineering. 2015. ●  Amir H. Gandomi, Ali Faramarzifar, Peyman Ghanad Rezaee,Abazar Asghari, Siamak Talatahari. “NEW DESIGN EQUATIONS FOR ELASTIC MODULUS OF CONCRETE USING MULTI EXPRESSION PROGRAMMING”. JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, England (taylor & Francis), 2014. ●  Abazar Asghari and Behnam Azimi. “Evaluation of Sensitivity of CBFs for Types of Bracing and Story Numbers”. Scientia Iranica (Elsevier),2015. ●  Abazar Asghari and Behnam Azimi , “Evaluation Of Effect Of Back Stay Effect On The Design Of Coupling Shear Walls”, Canadian Journal of Basic and Applied Sciences (CJBAS), 2015. ●  Abazar Asghari and Behnam Azimi , “A New Study of Seismic Behavior of Perforated Coupled Shear Walls”, International Journal of Civil Engineering, July 2017. ●  Abazar Asghari, “Computation of Discretization Error Using the Rule of Gradient Recovery and Adaptive Refinement of Elements”, AUT Journal of Civil Engineering (Amirkabir Journal of Civil Engineering, 2015. ●  Abazar Asghari, “Ductility Reduction Factor Evaluation of Combined Inverted V-braced and V-braced Frames”, Journal of Civil Engineering Sharif (Sharif University of Technology), 2015. ●  Abazar Asghari and Hamid Asadi, “Seismic Design of Building Frames in Conjunction with Concentrically Braces Using Temperature Variation Method in Braced Members”, Journal of Civil Engineering Sharif (Sharif University of Technology), 2015. ●  Abazar Asghari, “Ductility Evaluation of X-Braced Steel Frames which are Braced in Two Adjacent Middle Bays”, The Engineering Journal of the Ferdowsi University of mashhad, 2015. ●  Abazar Asghari, “Ductility Evaluation of Concentrically Braced Frame Structures that braced in Two the Separate Bays”, AUT Journal of Civil Engineering (Amirkabir Journal of Civil Engineering, 2017. ●  Hassan Amirzehni, Abazar Asghari and Erfan Shafei, “Evaluation of Seismic Behavior of Steel Braced Frames with Controlled Rocking System and Energy Dissipating Fuses”, Journal of Structural and Construction Engineering (JSCE), 2016. ●  Abazar Asghari and Saeed Saharkhizan, “Cyclic Behavior Examination and Performance Evaluation of Steel Frame with Knee Element Connection by Finite Element Analysis”, Journal of Civil Engineering Sharif (Sharif University of Technology), 2017. ●  Hassan Amirzehni, Abazar Asghari and Erfan Shafei, “Seismic Evaluation of Rocking Steel Braced Systems with CFRP Post-Tensioned Cables”, Modares Civil Engineering Journal (M.C.E.J) Vol.17, No.4, October 2017. ●  Abazar Asghari and S.Ghanaatpisheh, “Investigation about the Seismic Behavior of the SelfCentering Eccentrically Braced Frame with the Fuses Distributed in Height”, Journal of Structure & Steel, 2017. ●  Abazar Asghari, “Ductility Evaluation of inverted V-bracing and concentrically bracing systems”, Journal of Structural and Construction Engineering (JSCE), 2018. ●  Vahid jaberi and Abazar Asghari, “Seismic Rehabilitation of Existing Buildings by Linked Column System”, Journal of Civil Engineering Sharif (Sharif University of Technology), 2019.   Papers in National and International Confereces: ●  A.Asghari, R.Mirghaderi, ”Study of Moment Resistant Knee Braced Frames as an Alternative for Moment Resisting  Frames with Rigid Connections”, Eleventh World Conference on Earthquake Engineering (11 WCEE), paper No. 1354, Elsevier Science Ltd (1996). ●  Abazar Asghari, Siavash ghanaatpisheh, “Innovative Self-Centering Controlled Rocking Eccentrically Braced Frames”, 2nd international conference of engineering & applied science, UAE-DUBAI, 2016. ●  Abazar Asghari, Shahrokh Shoaybi and Alireza Sadeghi, “Philosophical Approach to Design of Steel Structures by Load and Resistance Factor Design (LRFD) and Comparison with Appropriate Allowable Stress Design (ASD)”, third National Conference on Steel and Structures, Tehran, 2012. ●  Abazar Asghari and Somayeh Shokri, “Comparison of the Behavior of Ordinary Moment Connection (OMC) with the Behavior of Free-Flange Connection (FFC)”, third National Conference on Earthquake and Structures, Kerman, 2012. ●  Abazar Asghari and Alireza Sadeghi, “Investigation of the Effect of the Number of Bracing Bayes on Double Steel Systems”, third National Conference on Earthquake and Structures, Kerman, 2012. ●  Abazar Asghari and Shahrokh Shoaybi, “Investigating the Behavior and Performance of diaphragms in Structural systems”, Iranian Society of Design Engineers, Tehran, 2012. ●  Abazar Asghari and Somayeh Shokri, “Comparison of the Behavior of Conventional Moment Connection with the Behavior of Unrestrained welded and Free Flange Connections”, 7th National Congress on Civil Engineering, Zahedan, 2013. ●  Abazar Asghari and Alireza Sadeghi, “Investigating the Effect of Layout and Number of Bracing Bayes of Dual Steel Systems on the UPLIFT Forces Created in the Supports”, 7th National Congress on Civil Engineering, Zahedan, 2013. ●  Abazar Asghari and Alireza Sadeghi, “Investigating the effect of Bracings Position on the Performance of Diaphragms”, 7th National Congress on Civil Engineering, Zahedan, 2013. ●  Abazar Asghari and Hamid Asadi, “Improve the Seismic Performance of Special Steel Braced Frames in Accordance with the AISC341 Specifications”, 7th National Congress on Civil Engineering, Zahedan, 2013. ●  Abazar Asghari and Hamid Asadi, “Provides an Effective and Simplified Method for Analyzing and Designing of X-Braced Frames by Using Thermal Loading”, 7th National Congress on Civil Engineering, Zahedan, 2013. ●  Abazar Asghari and Somayeh Shokri, “Comparison of Plastic Hinges Distribution in Conventional Moment Connections with Free Flange Connections (WUF-W)”, fourth National Conference on Earthquake and Structures, Kerman, 2013. ●  Abazar Asghari, Hamid Asadi, Ali Rahbr and Mehran Soltaninejad, “Introducing an Effective Strategy for Analyzing and Designing of braided frames to provide Expected Ductility”, 5th National Conference on Earthquake and Structures, Kerman, 2014. ●  Abazar Asghari, Somayeh Shokri and Ehsan Ahmadi Shirvani, “Investigate the Hysteresis Behavior of Free Flange Connections (WUF-W) and Compare with conventional Moment Connections”, 8th National Civil Engineering Congress, Babol, 2014. ●  Abazar Asghari, Saeed Saharkhizan and Amin Gholizadeh, “Study of the Behavior of Knee Braced Frames as an Alternative for Moment Connections”, Fourth National Conference on Materials and Modern Structures, Yasuj, 2015. ●  Abazar Asghari, Saeed Saharkhizan and Amin Gholizadeh, “Seismic Design of Knee Braced frames without Diagonal elements and evaluation of behavioral parameters of this system”, 6th National Conference on Steel and Structures, Tehran, 2015. ●  Abazar Asghari and Hadi Jafari, “Investigating the Behavior and Evaluation of Seismic Behavior of High-rise Buildings with Diagrid System”, International Conference on Civil Engineering, Tehran, 2016. ●  Abazar Asghari and Siyavash Ghanaat pisheh, “Investigating the Seismic Behavior of the Self-Centering Eccentrically Braced Frame with the Fuses Distributed in Height”, 7th National Conference and 2th international Conference on Steel and Structures, Tehran, 2016. ●  Abazar Asghari and Siyavash Ghanaat pisheh, “Investigating the sensitivity Self-Centering Eccentrically Braced Frame to the elevation position of Post-tensioned cables”, 4th International Civil-Architecture and Urban Development Congress, Shahid Beheshti University, December 27, 2016. ●  Abazar Asghari and Saeed Saharkhizan, “Providing a Axial Plastic Hinge for Knee Elements in Knee braced Frames”, 2th National Congress of Structural Engineering of Iran, Tehran, Amirkabir University of Technology, 2015.