صفحه شخصی دکتر سامان خلیل پور آذری

 | تاریخ ارسال: 1398/8/6 | 
 
 
Saman Khalilpourazary
Assistant Professor

Contact Information
Email: S.Khalilpourazarymee.uut.ac.ir, Saman.khalilpourgmail.com, saman_azariyahoo.com
Google Scholar Address:https://scholar.google.com/citations?user=NwDZ۶sEAAAAJ&hl=en
Researchgate Address: https://www.researchgate.net/profile/Saman_Khalilpourazary
ORCID ID: https://orcid.org/۰۰۰۰-۰۰۰۲-۸۴۸۴-۵۹۵۳
Author ID: ۳۶۷۸۲۵۴۵۴۰۰
Phone: +۹۸ - ۴۴ - ۳۳۵۵۴۱۸۰
Mailing Address: Faculty of Mechanical Engineering, Urmia University of Technology, ۲nd kilometers of Band Street, Urmia, West Azarbaijan province, Iran

 
Education
  • PhD Candidate in Mechanical Engineering (Manufacturing & Production), University of Tabriz, Tabriz, Iran.
Concentration: Fracture, Fatigue, Severe Plastic Deformation
Thesis: “Phenomenological Fracture Modeling of Copper with Considering the Effect of Grain Size”
  • MSc in Mechanical Engineering (Manufacturing & Production), Tarbiat Modares University, Tehran, Iran.

Concentration: CAD/CAM, Forging, Finite Element Method
Thesis: “Design and manufacturing of the Peugeot Differential Conical Gear in hot precision forging process using CAD/CAM Technology”
  •  BS in Mechanical Engineering (Manufacturing & Production), Mazandaran University, Babol, Iran.

    Concentration: Rapid Prototype, Investment Casting Method
    Thesis: 
    Investment Casting Method and Its Usage in the Wax Prototype Models Manufacturing

  • High School and Pre-University in Mathematics & Physics, Shahed high school, Urmia, Iran.
     

Work Experience
  • Faculty member, Mechanical Engineering Department, Urmia University of Technology, Urmia, Iran, ۲۰۰۹ up to now.
  • R&D Manager, Urmia Tractor Manufacturing Company, ۲۰۰۷-۲۰۰۹, Handled Projects:
  • “Optimization of the Garden Articulated Tractors Quality”
  • “Optimization the Gearbox Quality of the Garden Articulated Tractors”
  • “Design Manufacturing Layout for OTM ۹۴۲: New Garden Articulated Tractor”
  • “Promotion of the Safety Factor in OTM ۹۳۰ and ۹۳۸ Tractors Using Back-Mounted Safeguard”
  • Preparing the Turning Methodology Manual of the OTM ۹۳۰ and ۹۳۸ Garden Tractors parts, Urmia Tractor Manufacturing Company, ۲۰۰۹.
  • Preparing the Assembly Line Manual of the OTM ۹۳۰ and ۹۳۸ Garden Tractors, Urmia Tractor Manufacturing Company, ۲۰۰۸.
Journals
Khalilpourazary S., S.S. Meshkat, Salehi J., ۲۰۲۰. “Application of Alumina/Graphene Nanoparticles to Enhance the Surface Quality of Al۷۱۷۵-T۴ Specimens”, AUT Journal of Mechanical Engineering, New accepted. (Indexed in ISC)
Khalilpourazari S., Khalilpourazary S., Özyüksel Çiftçioğlu A., Wilhem Weber G., ۲۰۲۰. “Designing Energy-Efficient High-Precision Multi-Pass Turning Processes via Robust Optimization and Artificial Intelligence”, Journal of Intelligent Manufacturing, New accepted. (Indexed in ISI (Q۱ JCR index), Scopus)
Hosseini S.H., Khalilpourazary S., Zadshakoyan M., ۲۰۲۰. “Fracture Behavior of the Annealed and ECAPed Copper: An Experimental Study”, Journal of Materials Engineering and PerformanceNew accepted. (Indexed in ISI (Q۳ JCR index), Scopus)
  1. Khalilpourazari S., Khalilpourazary S., ۲۰۱۹. “An efficient hybrid algorithm based on Water Cycle and Moth-Flame Optimization algorithms for solving numerical and constrainedengineering optimization problems”, Soft Computing, Vol. ۲۳, No. ۵, pp. ۱۶۹۹-۱۷۲۲. (Indexed in ISI (Q۲ JCR index), Scopus)
Khalilpourazary S., Zadshakoyan M., Hosseini S.H., ۲۰۱۹. “Effect of Shear State on Fracture of Refined Grain Pure Copper”, Journal of Computational and Applied Research in Mechanical Engineering, Vol. ۹, No. ۲. (Indexed in ISC (Q۱ journal with a ۰.۱۷۹ Impact Factor and ۰.۱۸۶ Average Impact Factor (AIF) based on Islamic World Science Citation Center), Scopus)
Khalilpourazary S., Zadshakoyan M., Hosseini S.H., ۲۰۱۹. “Ductile fracture analysis of annealed and ECAPed pure copper”, Theoretical and Applied Fracture Mechanics, Vol. ۱۰۳. (Indexed in ISI (Q۱ JCR index), Scopus)
Khalilpourazary S., B. Naderi, Khalilpourazary S., ۲۰۱۹. “Multi-Objective Stochastic Fractal Search: A Powerful Algorithm for Solving Complex Multi-Objective Optimization Problems”, Soft Computing, pp. ۱-۳۰. (Indexed in ISI (Q۲ JCR index), Scopus)
Khalilpourazary S., Salehi J., ۲۰۱۹. “How Alumina Nanoparticles Impact Surface Characteristics of Al۷۱۷۵ in Roller Burnishing Process”, Journal of manufacturing processes, Vol.۳۹, pp.۱-۱۱. (Indexed in ISI (Q۱ JCR index), Scopus)
Khalilpourazary S., Zadshakoyan M., Hosseini S.H., ۲۰۱۹. “Fatigue Life Improvement of Copper Processed by Equal Channel Angular Pressing”, Experimental Techniques, Vol. ۴۳, No. ۳, pp.۲۳۷-۲۴۴. (Indexed in ISI (Q۳ JCR index), Scopus)
Khalilpourazari S., Khalilpourazary S., ۲۰۱۸. “Optimization of time, cost and surface roughness in grinding process using a Robust Multi-Objective Dragonfly Algorithm”, Neural Computing and Applications, pp.۱-۱۲. (Indexed in ISI (Q۱ JCR index), Scopus)
Khalilpourazari S., Khalilpourazary S., ۲۰۱۸. “A Robust Stochastic Fractal Search approach for optimization of the surface grinding process”, Swarm and Evolutionary Computation, Vol.۳۸, pp.۱۷۳-۱۸۶. (Indexed in ISI (Q۱ JCR index), Scopus)
Khalilpourazari S., Khalilpourazary S., ۲۰۱۸. “SCWOA: An efficient hybrid Algorithm for parameter optimization of multi-pass milling process”, Journal of Industrial and Production Engineering, Vol.۳۵, No. ۳, pp.۱۳۵-۱۴۷. (Indexed in Scopus)
Khalilpourazary S., Ahmadi J. ۲۰۱۸. “A New Approach to Enhance the Final Surface Quality in Drilling Operation: Evaluation of the Using Alumina Micro-Particle Additives on the Oil-Water Emulsion Cutting Fluid”, Journal of Computational and Applied Research in Mechanical Engineering, Vol. ۷, No. ۲, pp. ۲۲۳-۲۳۱. (Indexed in ISC (Q۱ journal with a ۰.۱۷۹ Impact Factor and ۰.۱۸۶ Average Impact Factor (AIF) based on Islamic World Science Citation Center), Scopus)
Khalilpourazari S., Khalilpourazary S., ۲۰۱۷. “A Lexicographic Weighted Tchebycheff approach for multi-constrained multi-objective optimization of surface grinding process”, Engineering Optimization, Vol.۴۹, No.۵, pp.۸۷۸-۸۹۵. (Indexed in ISI (Q۲ JCR index), Scopus)
Khalilpourazari S., Khalilpourazary S., ۲۰۱۶. “Optimization of production time in the multi-pass milling process via a Robust Grey Wolf Optimizer”, Neural Computing and Applications, Vol.۲۹, No.۱۲, pp.۱۳۲۱-۱۳۳۶. (Indexed in ISI (Q۱ JCR index), Scopus)
Khalilpourazary S., Payam N., ۲۰۱۶. “Optimization of the Injection Molding Process of Derlin ۵۰۰ Composite Using ANOVA and Grey Relational Analysis”, Journal of Computational and Applied Research in Mechanical Engineering, Vol. ۶, No. ۱, pp. ۳۹-۵۰. (Indexed in ISC (Q۱ journal with a ۰.۱۷۹ Impact Factor and ۰.۱۸۶ Average Impact Factor (AIF) based on Islamic World Science Citation Center), Scopus)
Zareh-Desari B., Abaszadeh-Yakhforvazani M., Khalilpourazary S., ۲۰۱۵. “The Effect of Nanoparticle Additives on Lubrication Performance in Deep Drawing Process: Evaluation of Forming Load, Friction Coefficient and Surface Quality”, International Journal of Precision Engineering and Manufacturing, Vol. ۱۶, No. ۵, pp. ۹۲۹-۹۳۶. (Indexed in ISI (Q۳ JCR index), Scopus)
Khalilpourazary S., Abdi Behnagh R., Mahdavinejad R.A., Payam N. ۲۰۱۴. “Dissimilar Friction Stir Lap Welding of Al-Mg to CuZn۳۴: Application of Grey Relational Analysis for Optimization of Process Parameters”, Journal of Computational and Applied Research in Mechanical Engineering, Vol. ۴, No. ۱, pp. ۸۱-۸۸. (Indexed in ISC (Q۱ journal with a ۰.۱۷۹ Impact Factor and ۰.۱۸۶ Average Impact Factor (AIF) based on Islamic World Science Citation Center), Scopus)
Khalilpourazary S., Meshkat S.S., ۲۰۱۴. “Investigation the Effects of Alumina Nanoparticles on Spur Gear Surface Roughness and Hob Tool Wear in Hobbing Process”, International Journal of Advanced Manufacturing Technology, Vol. ۷۱, No. (۹-۱۲), pp. ۱۵۹۹-۱۶۱۰. (Indexed in ISI (Q۲ JCR index), Scopus)
Khalilpourazary S., Kashtiban P.M., Payam N., ۲۰۱۴. “Optimization of Turning Operation of St۳۷ Steel Using Grey Relational Analysis”, Journal of Computational and Applied Research in Mechanical Engineering, Vol. ۳, No. ۲, pp. ۱۳۵-۱۴۴. (Indexed in ISC (Q۱ journal with a ۰.۱۷۹ Impact Factor and ۰.۱۸۶ Average Impact Factor (AIF) based on Islamic World Science Citation Center), Scopus)
Dadvand A., Khoo B.C., Shervani-Tabar M.T., Khalilpourazary S. ۲۰۱۲. “Boundary Element Analysis of the Droplet Dynamics Induced by Spark-Generated Bubble”, Engineering Analysis with Boundary Elements, Vol.۳۶, No.۱۱, pp.۱۵۹۵-۱۶۰۳. (Indexed in ISI (Q۲ JCR index), Scopus)
Khalilpourazary S., Dadvand A., Azdast T., Sadeghi M.H. ۲۰۱۱. “Design and Manufacturing of a Straight Bevel Gear in Hot Precision Forging Process Using Finite Volume Method and CAD/CAE Technology”, International Journal of Advanced Manufacturing Technology, Vol.۵۶, No.۱-۴, pp۸۷-۹۵. (Indexed in ISI (Q۲ JCR index), Scopus)
 
Patent
Khalilpourazary S., M. Madanpishe, “A portable wear measuring device for specifying the wear rate and friction coefficient of cylindrical specimens”, Iran Intellectual Property Office, Patent
No. ۹۶۹۷۷, International Classification G۰۱N۳/۵۶, ۲۰۱۸


 
National Journals
­­­
  1. Khalilpourazary S., “Reverse Engineering of the Flowmeter Elliptical gears Using CAD/CAM Technology”, Iranian Society of Mechanical Engineering Journal, Vol. ۲۹, No. ۳, pp. ۶۰-۶۵, ۲۰۲۰ (in Persian).
  2. Khalilpourazary S., “Investigation of the effects of alumina nanoparticles on spur gear surface roughness and hob tool wear in hobbing process”, Iranian Society of Mechanical Engineering Journal, Vol. ۹۳, pp. ۸۳-۴۶, ۲۰۱۴ (in Persian).
  1. Khalilpourazary S., “The Effect of the Virtual Process on the Total Reverse Engineering Costs of the Gear Handle”, Iranian Society of Mechanical Engineering Journal, Vol. ۸۴, pp. ۴۱-۵۰, ۲۰۱۲ (in Persian).
  2. Khalilpourazary S., Azdast T., “The Effect of CAD/CAM/CAE Technology on the Manufacturing Process of the Tractor Plastic Bush”, Iranian Society of Mechanical Engineering Journal, Vol. ۸۳, pp. ۴۰-۴۸, ۲۰۱۲ (in Persian).
  3. Khalilpourazary S., Geib Golami E., “Dimensional Analysis and Optimization of Transmission Gears of the Tractor Front Gearbox”, Iranian Society of Mechanical Engineering Journal, Vol. ۷۶, pp. ۶۶-۷۲, ۲۰۱۲ (in Persian).
  4. Khalilpourazary S., “Reverse Engineering of the Straight Bevel Gear of the Catastrophic Garden Tractor”, Iranian Society of Mechanical Engineering Journal, Vol. ۸۰, pp. ۵۷-۶۷, ۲۰۱۱ (in Persian).
Book
  1. Khalilpourazary S., “Process Planning: From Design to Cost Estimation”, Andisheh Sara Publication, ۱۳۶ pages, Fourth Edition (May ۲۰۱۵) - Third Edition (August ۲۰۱۴) - Second Edition (September ۲۰۱۳) - First Edition (December ۲۰۱۲) (in Persian).
  2. Khalilpourazary S., Khanjani A., “Rapid Prototype and Rapid Tooling on the Base of CAD/CAM Technology”, Naghous Publication, ۱۴۴ pages, First Edition (May ۲۰۰۵) - ۱۷۶ pages Second Edition (March ۲۰۰۶) (in Persian).
Conference Papers
  1. Khalilpourazary S., Nasib P., Mohammadi Nasab V., “Combined Application of Taguchi Method and Grey Relational Analysis for Optimization of St۴۴ Powder Submerged Arc Welding”, ۲۸th Annual International Conference of Iranian Society of Engineering (ISME۲۰۲۰), Tehran, Iran, ۲۰۲۰ (in Persian).
  2. Khalilpourazary S., Khani H., Mohammadi Nasab V., “Application of Geometric Modeling and Rapid Tooling in Reverse Engineering of DS۶ Car Window Glass Lifter”, ۲۸th Annual International Conference of Iranian Society of Engineering (ISME۲۰۲۰), Tehran, Iran, ۲۰۲۰ (in Persian).
  3. Khalilpourazary S.Khani H., Mohammadi Nasab V., “Reverse Engineering of the Rear View Mirror of the Peugeot ۴۰۵ Using Soft Tooling Method”, ۱۶th Annual and ۵th International Conference on Manufacturing Engineering (ICME۲۰۱۹), Tehran, Iran, ۲۰۱۹ (in Persian).
  4. Khalilpourazary S.Mohammadi M., Mohammadi Nasab V., “Reverse Engineering of the Modified Helical Bevel Gear of the VOLVO Marine Gearbox”, ۱۶th Annual and ۵th International Conference on Manufacturing Engineering (ICME۲۰۱۹), Tehran, Iran, ۲۰۱۹ (in Persian).
  5. Khalilpourazary S., Nasib P., Optimization of the Deep Drawing Process of ۳۰۴L Stainless Steel Using Grey Relational Method”,۱۶th Annual and ۵th International Conference on Manufacturing Engineering (ICME۲۰۱۹), Tehran, Iran, ۲۰۱۹ (in Persian).
  6. Khalilpourazary S., Nasib P., Mohammadi M., “Optimization of the Surface Roughness and Machining Rate Parameters of Metallic Composite Al/Sic in EDM Machining Using Grey Relational Method”, National Conference on Mechanical Engineering, Malayer, Iran, ۲۰۱۳ (in Persian).
  7. Khalilpourazary S., Nasib P., “Optimization of the Tool Wear, Machining Rate and Overcut Parameters of the Metallic Composite Al-۴Cu-۶Si-۱۰wt%SiCP in EDM Drilling Operation”, ۲۱st Annual International Conference on Mechanical Engineering (ISME۲۰۱۳), Tehran, Iran, ۲۰۱۳ (in Persian).
  8. Khalilpourazary S., Nasib P., “Minimization of Al۲O۳+TiCN Ceramic Tool Wear and AISI۴۱۴۰ Steel Surface Roughness in CNC Turning Machine Using Grey Relational Analysis”, Iran’s Third International Conference on Industrial Automation, Tehran, Iran, ۲۰۱۳ (in Persian).
  9. Khalilpourazary S., Nasib P., “Optimization of the Surface Roughness Parameter in Milling Operation of AISI ۳۰۴ Steel with End Mill Tool Using Grey Relational Analysis”, Iran’s Third International Conference on Industrial Automation, Tehran, Iran, ۲۰۱۳ (in Persian).
  10.  Khalilpourazary S., “Prediction of the Costs of Quality on the Blow Molding Process of a Plastic Bottle Using the Virtual Process Method and ۳Dprinting System”, ۱۳th International Conference on Manufacturing Engineering, ICME۲۰۱۱, Tehran, Iran, ۲۰۱۱ (in Persian).
  11. Khalilpourazary S., Nasib P., “Optimization of the Friction in a Combined Backward Can- Forward Rod Extrusion Using Grey Relational Analysis”, ۱۳th International Conference on Manufacturing Engineering, ICME۲۰۱۱, Tehran, Iran, ۲۰۱۱ (in Persian).
  12. Khalilpourazary S., Mohamadiaghdam K., “Investigation the Replacement Capability of the Forging Transmission Rod in Articulated Garden Tractor with a Casting Prototype One”, ۱۳th International Conference on Manufacturing Engineering, ICME۲۰۱۱, Tehran, Iran, ۲۰۱۱ (in Persian).
  13. Kashtiban P.M., Tahmoresnezhad J., Khalilpourazary S., “Deep Drawing Investigation Using Neural Network and Data Mining”, ۱۳th International Conference on Manufacturing Engineering, ICME۲۰۱۱, Tehran, Iran, ۲۰۱۱(in English).
  14. Mohiti E., Khalilpourazary S., Safaparvar S., “Optimization of the Surface Roughness in Ultrasonic Machining Via Generic Algorithm”, ۱۹th Annual Conference on Mechanical Engineering (ISME۲۰۱۱), Birjand University, Iran, ۲۰۱۱ (in Persian).
  15. Khalilpourazary S., Borjkhani M., Nasib P., “Minimization of Al۲O۳+TiCN Ceramic Tool Wear and AISI۴۱۴۰ Steel Surface Roughness in CNC Turning Machine Using Grey Relational Analysis”, ۱۹th Annual Conference on Mechanical Engineering (ISME۲۰۱۱), Birjand University, Iran, ۲۰۱۱ (in Persian).
  16. Meshkat H., Azdast T., Rashahmadi S., Veysi A.G., Khalilpourazary S., “Static and Dynamic Analysis of the Roll-Over Protective Structures (ROPS) of the Catastrophic Garden Tractors: An OECD Standard Investigation”, RAMIN Agricultural & Natural Resources University, Ahvaz, Iran, ۲۰۱۱ (in Persian).
  17. Khalilpourazary S., Khalilpourazary S., “The Effect of CAD/CAM/CAE Technology on the Cost of Quality of the Precision Forging Process of the Straight Bevel Gears”, Irans Second International Conference on Industrial Automation, Sharif University, Tehran, Iran, ۲۰۱۱ (in Persian).
  18. Khalilpourazary S., “Laser Application in Producing Skull Bone Implant Via Stereo Lithography Method”, International Congress of the Iranian Center for Medical Laser (ICML), Imam Khomeini Hospital, Tehran, Iran, ۲۰۱۱ (in English).
  19. Mohiti E., Khalilpourazary S., Oliaee A., “Optimization of the Surface Roughness and Material Removal Rate Parameters in Ultrasonic Machining Using Genetic Algorithm”, ۱۱th Iranian Conference on Manufacturing Engineering, Tabriz, Iran, ۲۰۱۰ (in Persian).
  20. Abdi A., Eskandarzade M., Khalilpourazary S., “Optimization of the EDM Parameters Using Grey Relational Method”, ۱۱th Iranian Conference on Manufacturing Engineering, Tabriz, Iran, ۲۰۱۰ (in Persian).
  21. Azdast T., Rashahmadi S., Veysi A.G., Khalilpourazary S., Meshkat H., “Static and Dynamic Analysis of the Roll-Over Protective Structures (ROPS) of OTM۹۳۰&۹۳۸ Catastrophic Garden Tractors based on the Organization for Economic Co-operation and Development (OECD) Standard and Finite Element Method”, ۱۱th Iranian Conference on Manufacturing Engineering, Tabriz, Iran, ۲۰۱۰ (in Persian).
Industrial Project
۱. Khalilpourazary S., “Investigation of the Effects of Alumina Nanoparticles on Spur Gear Surface Roughness and Hob Tool Wear in Hobbing Process”, National Science Foundation (NSF), Iran, ۲۰۱۳.
۲.
Khalilpourazary S., “Rapid Prototype Methods”, Research Project: the Urmia University of Technology and Urmia Tractor MFG. Co., Iran, ۲۰۱۰.
۳. Khalilpourazary S., “Measurement of the Modified Spur and Straight Bevel Gears parameters with common measuring devices”, Urmia University of Technology, Mechanical Engineering Department, Iran, ۲۰۱۰.

 
Research Interest
۱. Metal Cutting Processes
۲.  Gear Design and Manufacturing
۳. 
Optimization Methods (Meta-heuristic, Taguchi, Grey Relational Method, and Decision Making)
۴. 
Nano Lubricants

 
Reviewer
Editorial Board Member, American Journal of Mechanical and Materials Engineering,Science publication group، USA, ۲۰۱۹ up to now.
Editorial Board Member, Information Engineering and Applied Computing Journal, Whioce Publishing, Singapore, ۲۰۱۸ up to now
Editorial Board Member, Condensed Matter Physics Report Journal,
Whioce Publishing, Singapore, ۲۰۱۹
Reviewer, Modares Journal of Mechanical Engineering, (in Persian).
Reviewer, International Journal of Engineering, Materials, and Energy Research Center
Reviewer, Advance in Mechanical Engineering, Sage Publications LTD

Reviewer, Journal of Computational and Applied Research in Mechanical Engineering (JCARME), Shahid Rajaee University
 
Language Skills
English: Fluent in Speaking, Understanding, and Writing
Turkish: Fluent in Speaking, Understanding
Persian: Formal (Educated) Language
Kurdish: Native Language


دفعات مشاهده: 2767 بار   |   دفعات چاپ: 308 بار   |   دفعات ارسال به دیگران: 0 بار   |   0 نظر


کد پستی : 17165-57166

صندوق پستی : 419-57155

فکس : 04431980251

ارتباط مستقیم با ریاست : po@uut.ac.ir

پست الکترونیکی : info@uut.ac.ir

آدرس : آذربایجان غربی، ارومیه، ابتدای جاده بند، بالاتر از گلشهر 2

کانال اطلاع رسانی رسمی دانشگاه : @daneshgah_uut

پیوندهای تصویری
copyright@2019.Urmia University of Technology